|
Bevelling
Machines
|
|
|
VISION NUMERICAL
CONTROL STRAIGHT LINE BEVELLERS
|
|
913 T STRAIGHT LINE BEVELLING MACHINE
Vision Numerical Control Straight Line Bevellers
|
| TECHNICAL
CHARACTERISTICS |
|
|
|
913 T |
| Glass Thickness | 3
- 30 mm |
| Min. Glass Dimensions |
40 X 40 mm |
| Speed |
0,4 - 6 mt/min |
| Overall Dimensions |
9200x1800x2700 mm |
| Bevelling Angle |
3 -45 0 |
| Max. Bevelling Lenght |
60 mm |
| Power |
40 KVA |
| Weight |
5200 Kg |
|
|
|
| Wheel
configuration : |
|
| 1 Diamond
wheel for flat edge |
| 1
Polishing wheel for flat edge |
| 1 Stone
wheel for the rear arris |
| 3 Diamond
wheels for bevelling |
| 1 Stone
wheel for the front arris |
| 3 Resin
wheels for bevelling |
| 3 Felt
wheels for bevel polishing with cerium oxide |
|
|
Frame and Mechanics
-
The sturdy base frame and the extensive
use of corrosion-resistant materials (aluminium profiles,
stainless steel, polymers) make the machine reliable,i
long lasting and visually pleasing.
-
High precision pads machining grant
excellent bevel quality even with the minimum 3 degrees
angle.
-
A pad grinding device (optional) can be
fitted on the machine giving longer pad life and thus
cutting down maintenance costs and idle times.
-
Manual controls allow machine use even
in case of temporary failure of an electronic component.
-
Unique infeed emergency cut-off sensor
protects operator hands from accidental entrance to system.
-
The machine offers near-silent operation,
thanks to the wheels directly fitted on the spindles.
|
Electronics and Software
- An industrial PC controls all machine operations.
- New software, developed and written by Bottero,
complete and user friendly.
- All information required for bevelling is always
available on-screen in real time.
- High-accuracy and easy-to-read ammeters help wheel
adjustment thus giving a better bevel quality.
- Electric cabinet is fully on-board the machine,
simplifying installation and maintenance.
|
Use and Maintenance
- Automatic computer controlled lubrication assures
components longer life and bevel quality. In the P version
(both 907 and 910), peripheral wheel change is quick and
easy, thanks to the 90 degrees rotation of the whole
spindle-wheel group.
- Warning messages appear on-screen in case of incorrect
data input by the operator, thus helping to avoid machine
or glass damage.
- Glass location while bevelling and total meters
processed by each wheel are continuously displayed on-screen,
allowing correct machine use and keeping wheel consumption
under control.
|
